Home : Gallery : History : Uses : Behaviour : Maths : Forum : Propulsion : Links : Glossary
Main Forum Page

The Gyroscope Forum

 23 November 2024 17:34

Welcome to the gyroscope forum. If you have a question about gyroscopes in general, want to know how they work, or what they can be used for then you can leave your question here for others to answer. You may also be able to help others by answering some of the questions on the site.

Search the forum:  
 

Question
Asked by: Skender LIPO
Subject: Underground mine
Question: Haw to use gyroscope for underground mining orientation
Date: 25 May 2009
report abuse

Answers (Ordered by Date)
Answer: K Subramanian - 03/06/2009 18:23:22
 I am not that sure how to use Gyroscope for underground Mining but Perhaps It can be Made Clear that While Drilling for OIL or Gas , where we Drill very Deep Holes thro' RIGS in the Range of KiloMeters Gyroscope Based AHRS are used to determine Any Deviation in verticality of the Hole & Take Corrective Action otherwise if Holes Go Cross for such deep holes even for a very small veriation will result in large variation on at the Bottom & probably will hit the Adjoing Drilled Hole & will result in Big Disasater. This AHRS when Dropped vertically Down in the Hole , while drilling will very Accrately Give the Variation in verticality of thr Hole & Help in Correcting. The AHRS are very Accurate Gyroscope Based Systems.
Thanks

Report Abuse
Add an Answer >>
Website. Copyright © 2024 Glenn Turner. All rights reserved. site info
Do not copy without prior permission. Click here for gyroscope products