|
Main Forum Page
|
The Gyroscope Forum |
25 April 2024 06:53
|
|
Welcome to the gyroscope forum. If you have a question about gyroscopes in general,
want to know how they work, or what they can be used for then you can leave your question here for others to answer.
You may also be able to help others by answering some of the questions on the site.
|
Question |
| Asked by: |
Gerrit Harteveld |
| Subject: |
More gyroscopic propulsion forums |
| Question: |
Hi,
I've been looking into this matter for a few weeks and came up with a few idea's, is there a forum where you people meet that supports pictures and stuff? |
| Date: |
19 August 2009
|
| report abuse
|
|
Answers (Ordered by Date)
|
| Answer: |
Harry K. - 22/08/2009 10:51:06
| | | Hi Gerrit,
This is not only a gyroscope forum but you can post there gyroscope issues as well and this forum supports pictures and other file attachments!
[url=http://www.overunity.com/]http://www.overunity.com/[/url]
Regards,
Harry
|
| Report Abuse |
| Answer: |
Harry K. - 22/08/2009 10:54:25
| | | Sorry, my link doesn't work. Please copy and paste the following link:
http://www.overunity.com/
Regards,
Harry
|
| Report Abuse |
| Answer: |
Gerrit Harteveld - 22/08/2009 16:14:19
| | | Thanks, i've been to that site a few year back when i was busy with PM designs, it look very cluttered nowadays. :(
There is a new patent nr. US20090165594 , i drew it out and when i tried to verify my design i found that the exact same design was patented a month ago :D I was so p!ssed off that i immediatly designed a version with weights.
http://img.photobucket.com/albums/v156/pinobot/Inertial_Drive_idea_12.png
|
| Report Abuse |
| Answer: |
Glenn Hawkins - 14/09/2009 19:28:51
| | | In order to keep the frame and drive motors from rotating, your device must be sandwiched, that is, three devices layered on top of one another. The weights in the two outer crust of the sandwiched must rotate in the same direction at the same speed. The center devises must rotate in the opposite direction and twice as fast as those outside. Now you need four of these stacked sandwiches and have them connected together in a frame. You now have stability in space.
Still it will not work. There have hundreds if not thousands of such devices, using the same simple idea that have been patterned, beginning many years a go.
You must understand that if your system is to remain in alignment, the weights when separated by greater spaces must travel faster. Where your weights are closest together, they must travel slower. The fast forward areas carry more momentum and generate more centrifuge per weight, than do the slower stacked up ones in the rear. The result is that center of mass, the center of balance is offset toward the read, but it never changes, it never oscillates forward. Momentum is perfectly preserved. You can waste part of a lifetime fooling around these simple designs. Try to understand that engineers, mathematicians and inventers, some of them genius with IQ’s of 200 have investigated and understood that what you propose cannot be done. Spend your time in college if you want to learn.
If your care about your time and life and you believe me, then few will ever have help you as much as I just did.
|
| Report Abuse |
| Add an Answer >> |
|
