Home : Gallery : History : Uses : Behaviour : Maths : Forum : Propulsion : Links : Glossary
Main Forum Page

The Gyroscope Forum

 23 November 2024 21:23

Welcome to the gyroscope forum. If you have a question about gyroscopes in general, want to know how they work, or what they can be used for then you can leave your question here for others to answer. You may also be able to help others by answering some of the questions on the site.

Search the forum:  
 

Question
Asked by: Cheryl Jackson
Subject: How do you work the gyroscope?
Question: I have my Dad's gyroscope. I don't remember how to make it work. Can you give me some directions?
Date: 16 May 2004
report abuse

Answers (Ordered by Date)
Answer: webmaster@gyroscopes.org - 30/05/2004 21:51:46
 Assuming its a simple toy gyroscope you either need a pull handle or string. The string often gets lost but and fine string will work. You should find a hole on the shaft/axle.
put about a 1cm (half an inch) through the hole. Then rotate the shaft/axle, the string will start to roll round the shaft. Keep rotating until you only have a enough to hold.

Hold the outside of the gyroscope (not touching the disk or shaft) with one hand and with the other hand hold the string. Hold the gyroscope firmly and pull the string with some force. Keep pulling until the string comes out of the shaft.

You will then have a spinning gyroscope.

Thats the basics anyway.

Report Abuse
Add an Answer >>
Website. Copyright © 2024 Glenn Turner. All rights reserved. site info
Do not copy without prior permission. Click here for gyroscope products