|
Main Forum Page
|
The Gyroscope Forum |
23 November 2024 20:30
|
|
Welcome to the gyroscope forum. If you have a question about gyroscopes in general,
want to know how they work, or what they can be used for then you can leave your question here for others to answer.
You may also be able to help others by answering some of the questions on the site.
|
Question |
| Asked by: |
Alan Cresswell |
| Subject: |
TANGENTIAL precession of gyros |
| Question: |
Do you agree that it gives the same value as RADIAL precession ?
I submit that it clears for an action of PERPETUAL MOTION as at www.unifiedtheory.org.uk
and the arithmetic is given ands= checks out perfect ? Yes !? |
| Date: |
9 April 2005
|
| report abuse
|
|
Answers (Ordered by Date)
|
| Answer: |
Eric James ----- - 30/04/2005 10:04:23
| | | Alan,
First let me say that I like guys that try and come up with these "theories of everything." It's good mental gymnastics.
That said, your "tangential" precession doesn't work.
"Wait!" you're going to say, "But I tried it and it DID work!"
It probably did.
This is because you most likely had an unbalanced system.
Most DC motors use a substantial portion of the case to hold and support relatively lightweight brushes, thus causing the other end (mostly filled with heavy magnets and rotor) to weigh more. The heavy end also has an additional built in (hidden) gyro (the rotor).
So yes, it will precess when using ordinary DC motors. Most AC motors incorporate similar concerns.
To do this experiment corectly requires a special motor, or twin motor configuration.
The two gyros attempting to precess in opposite directions simply cancel each other out. Ergo, no precession.
Eric
|
| Report Abuse |
| Add an Answer >> |
|
