|
Main Forum Page
|
The Gyroscope Forum |
23 November 2024 17:35
|
|
Welcome to the gyroscope forum. If you have a question about gyroscopes in general,
want to know how they work, or what they can be used for then you can leave your question here for others to answer.
You may also be able to help others by answering some of the questions on the site.
|
Question |
| Asked by: |
Pete Turland |
| Subject: |
Mobius strip |
| Question: |
Has anyone ever experimented with a mobius strip, to see if it only has one side gyroscopically? |
| Date: |
23 June 2006
|
| report abuse
|
|
Answers (Ordered by Date)
|
| Answer: |
Victor Geere - 20/07/2006 08:55:05
| | | Yes. But it has two sides (an inside and an outside) with a direct path between the two. The axle is always on the inside so it makes no difference.
you can draw a line from one side of a flat piece of paper to the other side as well (and drive your science teacher around the bend, if he has a one-track mind) :)
|
| Report Abuse |
| Answer: |
Arthur Dent - 14/08/2006 10:59:08
| | | There exists a photograph of Eric Laithwaite standing next to a 3D figure-of-8 track. If I recall correctly, the track had a twist which made it into a Moebius strip. There exists a patent for a very similar track. It is purported to be a (non-gyroscopic) reactionless space drive. Again, I am not sure whether it is of Moebius form. If I did not have a life, I would check these details. I would also try to check whether the inventor, or Laithwaite, was the imitator. Judging by his track-record, my money would be on Laithwaite.
|
| Report Abuse |
| Add an Answer >> |
|
