|
Main Forum Page
|
The Gyroscope Forum |
20 April 2024 12:35
|
|
Welcome to the gyroscope forum. If you have a question about gyroscopes in general,
want to know how they work, or what they can be used for then you can leave your question here for others to answer.
You may also be able to help others by answering some of the questions on the site.
|
Question |
| Asked by: |
Nathaniel Gardner |
| Subject: |
Gyroscope Propulsion System |
| Question: |
Okay, Here is another complicated question. Imagine a co-ordinate plane with 3 axis the X horizontal, the Y Vertical, and the Z 3D axis. Now you have a gyroscope spinning clockwise(A) with the central disk along
f(x) = 0 and the Z axis. Now you have a gyroscope spinning clockwise (B) set at a 45 degree angle above A and another spinning at 45 degrees below A (C). The Central disks would look like this on the coordinate plane:
\
|
/
it's not perfect, but you understand the point. Also, you would have gyroscopes (D and E) spinning clockwise at 45 degree angles along the Z axis so that the whole system would look like this:
\
== |
/
Would the movement of the entire system be --> that direction IF a force (such as magnetism) was applied to B, C, D, and E which pulled them toward the negative X axis? Tell me what you think! If you are confused, lol...I'll have to draw you a picture and send it to you. But the whole system looks like the Carbon Tetrafluoride Molecule. |
| Date: |
19 August 2006
|
| report abuse
|
|
Answers (Ordered by Date)
|
| Answer: |
Nathaniel Gardner - 19/08/2006 18:14:52
| | | WHOOPS! I drew the diagram wrong! they would look like this
\
--
/
and also
\
== --
/
respectively. Sorry for the mistake.
|
| Report Abuse |
| Add an Answer >> |
|
