Home : Gallery : History : Uses : Behaviour : Maths : Forum : Propulsion : Links : Glossary
Main Forum Page

19 March 2024 07:32

Welcome to the gyroscope forum. If you have a question about gyroscopes in general, want to know how they work, or what they can be used for then you can leave your question here for others to answer. You may also be able to help others by answering some of the questions on the site.

Search the forum:  
 

<< PrevPage 2 of 17
( 836 Questions found)
Sorting by:
Go to Page: [1][2][3][4][5][6]...
Next >>

For Sandy but for all
Incredibly, I see a possibility again. I say incredibly because of uncounted attempts and failures and mechanical understandings and explanations. But I am rethinking the possibility and it is because ...
Asked on 21 September 2019 by Glenn Hawkins
Read Question in Full      No answers as yet.
 
Why Professor Laithwaite was able to lift his gyro.
I don't really have a question - more of a announcement. :-) - to wit, I have discovered why Professor Laithwaite was able to lift his gyro into the air and what this implies for free energy. I a ...
Asked on 5 September 2019 by Frank Grimer
Read Question in Full      View Answers (10 answers)
 
Special mechanics of the gyroscope
Special mechanics of the gyroscope By Glenn Marion Hawkins Precession As angular momentum is increased, inertia resistance to tilting is increased. Precession is the result of a tug-of-war ...
Asked on 21 August 2019 by Glenn Hawkins
Read Question in Full      View Answers (3 answers)
 
Revised Special mechanics
Special mechanics of the gyroscope By Glenn Marion Hawkins Precession As angular momentum is increased, inertia resistance to tilting is increased. Precession is the result of a tug-of-war be ...
Asked on 21 August 2019 by Glenn Hawkins
Read Question in Full      No answers as yet.
 
Theres a new player in town (New Alex Jones device!)
https://www.youtube.com/watch?v=s44cygWo2UQ I sent him one of my gyroscopes, and he's getting a lot of luck with it. It's an identical gyro to what I'm using on the M Thruster.
Asked on 28 July 2019 by MD
Read Question in Full      No answers as yet.
 
just a ranting question
Why can't centrifugal force be called one of the normal forces and be done with it. the other normal force I know of is down. when something is down it can not go any further because of the normal f ...
Asked on 1 July 2019 by d brown
Read Question in Full      View Answers (6 answers)
 
M Drive guy here, I uploaded a video of an Alex Jones device
I made this crude prototype in January 2013, but decided to upload it because an Aussie had recently tried to experiment with a version of his own. Here's my upload: https://www.youtube.com/watch ...
Asked on 23 June 2019 by MD
Read Question in Full      View Answers (1 answers)
 
New discovery
Not so fast. Inertia propulsion may be possible. I just emailed my friend, Sandy, explaining some new discoveries. We will what he thinks. I did solve all the mysteries of gyroscopic actions and I h ...
Asked on 1 November 2018 by Glenn Hawkins
Read Question in Full      No answers as yet.
 
New discovery
Not so fast. Inertia propulsion may be possible. I just emailed my friend, Sandy, explaining some new discoveries. We will what he thinks. I did solve all the mysteries of gyroscopic actions and I h ...
Asked on 1 November 2018 by Glenn Hawkins
Read Question in Full      No answers as yet.
 
New descovery
Not so fast. Inertia propulsion may be possible. I just emailed my friend, Sandy, explaining some new discoveries. We will what he thinks. I did solve all the mysteries of gyroscopic actions and I h ...
Asked on 1 November 2018 by Glenn Hawkins
Read Question in Full      No answers as yet.
 
What influences precession speed?
Can anyone tell me what influences precession speed? Is it proportional to the speed that the gyroscope rotates? How is it affected by the angle of the axle?
Asked on 21 October 2018 by JCTurner
Read Question in Full      View Answers (2 answers)
 
the gyroscopic effect
Does anyone else hear know the actual causation of the gyroscopic effect? Eric (not laithwaite)
Asked on 2 October 2018 by Eric not Laithwaite
Read Question in Full      No answers as yet.
 
Lslsune
What would results, if gyroscope wheel wears out gradually and vibrates itself in its housing?
Asked on 2 August 2018 by Lalaine
Read Question in Full      View Answers (1 answers)
 
Gyroscopic Propulsion
Questions Asked by: Numerous Subject: inertial propulsion with gyroscope Questions: Numerous Answers: Numerous Good Evening LAURENT, Glenn, Woopy, Sandy, Nitro, Miklos, and all interested ...
Asked on 1 August 2018 by HARVEY FIALA
Read Question in Full      View Answers (1 answers)
 
Slingshot theory of propulsionless space travel
Greetings! There is a new propulsionless space travel method that is being debated at 4chan in the past 2 weeks, not reaching consensus. Naysayers go for 'it breaks physics', yaysayers go for 'en ...
Asked on 6 June 2018 by Virtual Universe
Read Question in Full      View Answers (1 answers)
 
Slingshot theory of propulsionless space travel
Greetings! There is a new propulsionless space travel method that is being debated at 4chan in the past 2 weeks, not reaching consensus. Naysayers go for 'it breaks physics', yaysayers go for 'en ...
Asked on 6 June 2018 by Virtual Universe
Read Question in Full      View Answers (1 answers)
 
Slingshot theory of propulsionless space travel
Greetings! There is a new propulsionless space travel method that is being debated at 4chan in the past 2 weeks, not reaching consensus. Naysayers go for 'it breaks physics', yaysayers go for 'en ...
Asked on 6 June 2018 by Virtual Universe
Read Question in Full      No answers as yet.
 
Hanging in mid air
Hi, i am a dancer and also interested in pyshics. I thought of an idea; if i could rotate in a way like a gyroscpoe (lets think i have enough musclepower) would i hang in mid air? İ think the gyr ...
Asked on 6 April 2018 by haluke
Read Question in Full      No answers as yet.
 
how to post on the right topic
Hi Glenn I am completely new on this forum and i wanted to post my first question on the topic "propulsion" As i did not see the questionunder "propulsion" i have made duplicata. So ple ...
Asked on 21 January 2018 by woopy
Read Question in Full      No answers as yet.
 
inertial propulsion
I have replicated a device from M. Harvey Fiala's patent i have made a serie of 4 video under the pseudo "woopyjump "at youtube Part 1 here https://youtu.be/AGKXnp1twUk is someb ...
Asked on 21 January 2018 by woopy
Read Question in Full      No answers as yet.
 
gyroscopic propulsion test
Hi all I am new here but i know this forum for a long time. I am an experimenter and love to realise things So i recently found the patent of M. Harvey Fiala. So i did replicate one of the sim ...
Asked on 21 January 2018 by woopy
Read Question in Full      No answers as yet.
 
summing X, Y and Z gyroscope values
Hi, I am using an electronic gyroscope and I want to calculate the degrees the device has turned regardless of any angle changes whilst it is turning. So for example with the Z gyroscope I can ca ...
Asked on 3 January 2018 by Timothy
Read Question in Full      No answers as yet.
 
RPM of gyroscope wheel to balance
what should be the diameter and RPM of rotat
Asked on 1 January 2018 by vineethkumar
Read Question in Full      No answers as yet.
 
Disk
Why can we not build a gyroscope that uses simulated none physical energy instead of a disk?
Asked on 10 December 2017 by AQ Wheeler Jr
Read Question in Full      No answers as yet.
 
IP
SOMETHING HAS TO BE EJECTED THAT IS UNEQUAL TO OPPOSITE FORCE Can energy be ejected in a constant direction from a device, while the original amount of mass is retained and an d remains inactive? ...
Asked on 8 November 2017 by Glenn Hawkins
Read Question in Full      No answers as yet.
 
weight or diameter
I am trying to build a large stabilization gyroscope and spin at 1200 rpm,what will give me the most stabilization, large diameter or smaller and heavy ,your thoughts please regards lyn
Asked on 26 July 2017 by Lyn gentry
Read Question in Full      No answers as yet.
 
Lear Siegler Directional Gyro, Model 9010E
Hey guys, I'm new to gyroscopes. I'm looking for any information about the operation of the 9010E directional gyro, especially the pin-out of the 18 pin circular connector. A block- or circuit diagr ...
Asked on 23 July 2017 by gyrofreek
Read Question in Full      No answers as yet.
 
Gyroscope in stabilization
how can i use gyroscope mechanism to stabilize my camera in filming?
Asked on 7 June 2017 by 9490920046
Read Question in Full      No answers as yet.
 
Royal Institution Christmas Lectures on gyroscopes
I am trying to get hold of a video of Prof.Laithwaite Royal Institution Christmas Lectures on Gyroscopes. To my surprise I could not find it on Amazon. Has it been suppressed, send down the memor ...
Asked on 16 April 2017 by Frank Grimer
Read Question in Full      No answers as yet.
 
Searchinfor Insurance
I have a two person human gyroscope I have not been able to find an insurance carrier, or for that matter even remotely affordable premiums in recent years. As it is operated solely by me and as a sid ...
Asked on 17 February 2017 by Phillip Dorson
Read Question in Full      No answers as yet.
 
It is all so tricky
I once laid out rows of round pencils and placed a thin piece of Styrofoam on top of the pencils. On one end of the Styrofoam plate I added a little Styrofoam vertical wall attached with hot melt g ...
Asked on 23 January 2017 by Glenn Hawkins
Read Question in Full      No answers as yet.
 
A New Year quiz
Happy New Year everyone. As there has been little sign of new thought on gyrodynamics of late I thought I would pose a New Year quiz asking what you all think will occur with the application of a ...
Asked on 12 January 2017 by Nitro
Read Question in Full      No answers as yet.
 
Potters wheel
When I throw clay on the wheel it becomes softer the faster the wheel spins.This is noticeable when centering the clay .I think the spin of the wheel changes the electromagnetic holding pattern of the ...
Asked on 22 December 2016 by onablueplanet
Read Question in Full      No answers as yet.
 
RIGB Lecture links
I can't get to see these. Each link has a wrong address message. Any advice? DFG
Asked on 15 December 2016 by David Gatehouse
Read Question in Full      View Answers (1 answers)
 
What has happened
Been a long time since i came on this site and since i met Glenn Turner. 2 years since last post here? is site dead? Built machine, not quite as intended due to engineering guys changing some o ...
Asked on 28 November 2016 by DaveS
Read Question in Full      View Answers (2 answers)
 
Share my skils
https://youtu.be/1pThERtwR6k
Asked on 15 November 2016 by stella1958
Read Question in Full      No answers as yet.
 
Resistance to Motion
The frame of a gyroscope is fixedly attached with the gyroscopes axis vertical to a horizontal lever that mechanically allows the gyroscope's frame to be rotated about it's axis (yaw) and to be pitche ...
Asked on 16 September 2016 by Designman
Read Question in Full      No answers as yet.
 
Gamma Drive - Gyrodisk
Hello All, Surely, inertial propulsion can come when we release some of the 360 centrifugal force of rotors. One way is to combine gyroscopic forces (ala: Kidd, etc) and eccentric-mass force ...
Asked on 26 August 2016 by James
Read Question in Full      View Answers (2 answers)
 
anybody else have this problem?
Why are all these computer programmer nerds so incredibly !STUPID!. My email system is in text mode by default and for some incredibly stupid reason any internet links embedded in emails, in my sy ...
Asked on 23 August 2016 by Dave
Read Question in Full      No answers as yet.
 
bike stabilisation
Hey I HV thought of an idea for self stabilisation of bikes by using self rotating rim in addition it will use heavy liquid technology which will shift itself to create a reaction force if it is possi ...
Asked on 21 July 2016 by mayur ruyam
Read Question in Full      View Answers (1 answers)
 
Finding Centrifuge
In this way, you can see the angular momentum and centrifuge fully functioning during precession. You will have to do a little thinking and a little work, but not much. I will not explain yet explain ...
Asked on 3 July 2016 by Glenn Hawkins
Read Question in Full      No answers as yet.
 
Watch centrifuge acting
In the following way, you can find angular momentum and centrifuge fully functioning during precession. You will have to do a little thinking and a little work, but not much. I will not yet expla ...
Asked on 3 July 2016 by Glenn Hawkins
Read Question in Full      No answers as yet.
 
Finding proof of angular momentum & centrifuge
In this way you will find the angular momentum and centrifuge fully functioning during precession. You will have to do a little thinking and a little work, but not much. I will not explaint yet, ...
Asked on 3 July 2016 by Glenn Hawkins
Read Question in Full      No answers as yet.
 
Newtons cradle
After examining the video on Wikipedia I wondered what would happen if the metal balls were rotating Gyro Balls instead? Would the reaction still be in the opposite direction?
Asked on 17 June 2016 by James
Read Question in Full      View Answers (3 answers)
 
Formula
Hey, i am searching for some formulas, regarding my research. Could you please elaborate me the formula for weight and length of cyclist, in terms of gyroscopic radius. Thank you. will be waiting for ...
Asked on 17 June 2016 by zain ul abdin
Read Question in Full      No answers as yet.
 
How many countries could produce Ring Laser Gyroscope?
From newspaper, I know that only 4 countries could produce ring laser gyroscope, including PRC. Is it real? Actually we are the Ring Laser Gyroscope manufacturer,www.mh-elec.com from my exper ...
Asked on 1 June 2016 by MH ELECTRONICS
Read Question in Full      No answers as yet.
 
gyroscope for sale uk
hi mate i have a gyroscope for sale its a used one in very good nick and i am in the uk is swindon
Asked on 25 May 2016 by luke cooper
Read Question in Full      No answers as yet.
 
Query
I'm consisting the merits of installing a flywheel to a motorcycle sidecar in hopes of increasing stability in turns (sidecars typically want to lift during left hand turns, this is called flying the ...
Asked on 22 May 2016 by Kevin
Read Question in Full      No answers as yet.
 
Initial Position
Hello everyone, I am new on this forum and going through it I couldn't find answer to my question. So I am using the 9 dof chip from adafruit: BNO055 in NDOF mode. It is mounted on a door and I ...
Asked on 28 April 2016 by yoguime
Read Question in Full      No answers as yet.
 
Hibernating time is over
Dear All, The gyro site has gone very quiet and although it has been a bad year, with so many good people dying, you inquisitive lot cannot all have pegged it at once – can you? It’s spring ...
Asked on 26 April 2016 by Nitro
Read Question in Full      View Answers (1 answers)
<< PrevPage 2 of 17
( 836 Questions found)
Sorting by:
Go to Page: [1][2][3][4][5][6]...
Next >>

Website. Copyright © 2024 Glenn Turner. All rights reserved. site info
Do not copy without prior permission. Click here for gyroscope products