about this math page Hello I think the “ force on bearings “ must change to “force on each bearing “ and the third line must be deleted. also the unit must change to Newton. Thanks Asked on 8 June 2004 by Sh.Yazdani Read Question in Full      No answers as yet.

the torque causes Gyroscopic couple force Hi dears; the right answer of this question is very important for me. Please say me how much is the torque Appling for degrees change of main structure of gyroscope, in order to create Gyroscopic coup ... Asked on 1 June 2004 by SH. Yazdani Read Question in Full      No answers as yet.

difference between virtcal or horizontal flywheel spinning on a shaft Hi, I was wondering how gravity affects a flywheel when spinning on a vertical shaft opposed to it spinning on a horizontal shaft. Assuming that the flywheel is balanced and all other conditions are t ... Asked on 28 May 2004 by David Chipchak Read Question in Full      View Answers (1 answers)

gyro drift what causes gyro drift, and is it generally linear in nature? I'm principally interested in gyros used for measuring roll rate. Asked on 20 May 2004 by kerry allen Read Question in Full      View Answers (1 answers)

Error on the maths page. The speed in Kilometers per hour is given as (((rpm * circumference) / 1000) * 360) I believe it should be (((rpm * circumference) / 1000) * 60) the 60 is to convert minutes to hours. Asked on 10 May 2004 by Brian Turner Read Question in Full      View Answers (1 answers)

Units for density on your maths page, a project Hi, What is the unit of density used on your maths page (the Java? calculator) gm/cm^3? I'm seriously consitering recreating stabilisation system in this machine: http://www.catskillarchive.com/r ... Asked on 14 April 2004 by Gary Payton Read Question in Full      No answers as yet.

basic forces acting on a gyroscope can someone please define the basic forces (torque, weight, etc) acting on the gyroscope and how they result in precession? Asked on 12 April 2004 by jazz ray Read Question in Full      View Answers (1 answers)

Speed calculation with a gyroscope In my math book I read that a sometimes a gyroscope is used to measure the speed of, for instance, a plane or a boat. But how does this happen? I think it's possible to calculate the angel change, t ... Asked on 16 March 2004 by Chiel Ham Read Question in Full      View Answers (1 answers)

gyro math page What is “cut-away” part in a gyroscope? And what is the meaning of “cut-away measurements” in the gyroscope math page? Thank you Asked on 26 January 2004 by Sh.Yazdani Read Question in Full      View Answers (2 answers)

Leveling a gyroscope rod? With a specific application in mind, I am wondering if it is possible to keep a hollow 2in dia x 4ft steel rod standing on end, while perfectly level? Could this be achieved by putting gyroscopes insi ... Asked on 25 January 2004 by EV Read Question in Full      View Answers (1 answers)

gyrocopic effect How do you measure gyroscopic effect? Asked on 11 January 2004 by Michael Rivlin Read Question in Full      View Answers (1 answers)

Putting an unbalanced object inthe middle Can you put an unbalanced object, like ball with one side heavier than the other,in the middle of a gyroscope and have it always be level? Asked on 2 December 2003 by JoanM.Wyand Read Question in Full      View Answers (1 answers)

gyroscopic motion in a boat what are the different ways in which a gyroscopic motion arises while sailing in a boat Asked on 20 November 2003 by keri don Read Question in Full      View Answers (1 answers)

Gyro Ring I have this toy to analyze, its a gyro ring, maybe you've heard of it? Its a metal ring with smaller colored rings on it, when you spin the small rings in the right way they begin a gyro like motion o ... Asked on 15 November 2003 by Paul Dovydaitis Read Question in Full      View Answers (1 answers)

perpendicular gyroscopes If the axes of two gyroscopes were set perpendicular to one another, would the precession of one gyroscope offset the other? I understand that this configuration of gyros is used to stabalize cameras, ... Asked on 14 November 2003 by spencer parks Read Question in Full      View Answers (1 answers)

GYROSCOPE VERTICAL USE Hi , i need some info on how a gyro can be used to calculate vertical positioning, up and down, no left and right usage at all. also any manufactures out there where i can purchase one for testing? an ... Asked on 2 November 2003 by joe Read Question in Full      View Answers (1 answers)

Precession and speed of gyroscope If does create a resistance couple on gyro that causes reducing the speed of gyro faster, When a tilting force is applied on gimbaled gyroscope? Asked on 27 October 2003 by Sh.Yazdani Read Question in Full      No answers as yet.

gyros applied a site where the application of a gyro is described and how it set up initially and how you would normally correct for drift? Thanks, Woody Asked on 9 October 2003 by Harold Wood Read Question in Full      No answers as yet.

Gyro looking for a numercial solution ( computer program )for gyroscopic motion and forces. Does anyone know of a source? Thanks Asked on 2 October 2003 by Don Michelotti Read Question in Full      View Answers (1 answers)

3 PHASE P.S. I AM LOOKING FOR THE SCHEMA ELECTRICAL FOR TO MAKE A 3 PHASE 400 HZ POWER SUPPLY POWER ABOUT 50WATT THANK YOU GIULIANO Asked on 26 September 2003 by GIULIANO Read Question in Full      View Answers (2 answers)

GYROS DIRECTIONAL GYRO C.L.11. PART No.19331-0M SERIAL No.395/62 MADE IN ENGLAND BY SPERRY GYROSCOPE BRACKNELL BERKS DIRECTIONAL CONTROL TYPE J-4 GYRO MAGNETIC AIRCRAFT SPEC. MIL C 5412 MFR ... Asked on 22 September 2003 by GIULIANO I4VGG Read Question in Full      View Answers (1 answers)

use of gyroscope in a missile need information on these topics, require ur assistance.thanks 1. what type of a gyro do we use in a missile? 2. how does it calculate the position of the missile with respect to the target? ... Asked on 18 September 2003 by vishwas karma Read Question in Full      View Answers (2 answers)

regarding gyroscopic couple How do you analyse the direction of the active and reactive gyroscopic couple. I would like to know the answer by starting from the exact basics of what is gyroscopic couple etc. Asked on 17 September 2003 by Ameya Soparkar Read Question in Full      No answers as yet.

Large Gyro Saftey Hi, I know some people building a very large gyro. It has two spinning rings, a 9 ft. diameter ring with an 8 ft. diameter ring inside it. They are made of 6 inch schedule 40 steel tubing, so very h ... Asked on 8 September 2003 by Pat Wickline Read Question in Full      View Answers (1 answers)

gyro MK 12-1 I found an old wooden box in basement. It has a something in it called a MK 12-1 Gyro Can you forward me any information? Is it worth anything? It's pretty cool looking ..thanks! Asked on 6 September 2003 by Guy Ruggiero Read Question in Full      View Answers (11 answers)

Applying gyroscopes I have an idea that a bicycle, especially a training bicycle, could be fitted with a gyroscope of some sort to help stabilize both bike and rider while the biker would "get the hang" of balancing hims ... Asked on 3 September 2003 by Jim Sylvester Read Question in Full      View Answers (1 answers)

GYROSCOPE I HAVE TO MUCH GYROS AND I AM LOOKING FOR THE ELECTRIC SCHEMA FOR TO EXPERIMENT .I HAVE THE 3 PHASE 400 HZ GENERATOR.CAN YOU HELP ME? I4VGG GIULIANO Asked on 2 September 2003 by GIULIANO Read Question in Full      No answers as yet.

German WW2 Torpedo Gyro Hi, Wondering if anyone can point me to where I can find information on German WW2 period (pre-WW2?) torpedo gyros. I'm specifically after the G7a T1 (21") torpedo gyro. Any pointers would be gre ... Asked on 27 August 2003 by Andrew Gee Read Question in Full      View Answers (3 answers)

how is a gyroscope made north seeking? hi everyone, i'd like to know how a gyroscope is made north seeking for use in a gyro compass. now i know about the rigidity in space n precession... as in, what they are n what they mean with ref. to ... Asked on 8 August 2003 by suds Read Question in Full      View Answers (5 answers)

Electric power consumption... Could someone tell me the electric power consumption(watt) of a gyroscope? I think of the gyroscopes in a robot, maybe someone knows a source where technical details are listed. Thank you :) Asked on 4 August 2003 by Coldmind Read Question in Full      View Answers (1 answers)

Calculation of the tilting force in gyroscope how can we calculate the tilting force for a gyro with known inertia and R.P.M. ? Asked on 8 July 2003 by Shahriar Yazdani Read Question in Full      View Answers (7 answers)

What is meant by Gyro drift rate? What is meant by drift rate in gyro? Asked on 24 April 2003 by Seeniammal Read Question in Full      No answers as yet.

How to model Errors of RLG How to model Errors of RLG Asked on 17 January 2003 by D penchalaiah Read Question in Full      View Answers (1 answers)

Using gyroscopes in a robot Hi everybody I need a device to determine my robot's position in all three dimensions and need to know is it parallel to ground.please help me. tnx Puya Asked on 13 October 2002 by Puya Maleky Read Question in Full      View Answers (1 answers)

Gyroscope used as a generator I have read in several places that gyos can be used as electric generators, what i dont see are output estimates. Just how much net power can be produced? Any links to related research would be apprec ... Asked on 29 October 2001 by Curtis Sumner Read Question in Full      View Answers (5 answers)

Gyroscopes as alternative for batteries? I was wondering if anybody knew who to contact about this question. It seems that I've seen the idea posed before for a gyroscope to be used as a battery/alternator. The article I read, which was some ... Asked on 11 April 2001 by Tim Richards Read Question in Full      View Answers (4 answers)

<< Prev

Page 4 of 4 ( 186 Questions found) Sorting by: Most recent QuestionsMost recent AnswersQuestions with most repliesQuestions with no replies Go to Page: [1][2][3][4]