Aerial camera mount
I have been trying to film from a gyroplane (Sony HD 1) for the past 6 months using various home made mounts without success due to excessive camera shake. I have concluded that a gyro stabilized syst ...
Asked on 5 December 2008 by Bryan Griffiths
Read Question in Full
View Answers (2 answers)
|
| |
PRECESSION THE BASICS
Juxtaposed conditions during gyroscopic reactions
When the speed of a rotating flywheel is increased:
(1.a) Positive reaction: The power of resistance to tilt increases.
(1.b) Negative Re ...
Asked on 25 November 2008 by Glenn Hawkins
Read Question in Full
View Answers (3 answers)
|
| |
PRECESSION THE BASICS
Juxtaposed conditions during gyroscopic reactions
When the speed of a rotating flywheel is increased:
(1.a) Positive reaction: The power of resistance to tilt increases.
(1.b) Negative Re ...
Asked on 25 November 2008 by Glenn Hawkins
Read Question in Full
No answers as yet.
|
| |
UNDERSTANDING THE BASICS
Juxtaposed conditions during gyroscopic reactions
When the speed of a rotating flywheel is increased:
(1.a) Positive reaction: The power of resistance to tilt increases.
(1.b) Negative Re ...
Asked on 24 November 2008 by Glenn Hawkins
Read Question in Full
No answers as yet.
|
| |
Free (Reaction Less) Torque Generation – Fiction or Reality
Dear Sirs,
I just wonder do you have interest in Free (Reaction less) Torque Generation.
In future this technology can replace Control Moment Gyros and Reaction Wheels used for space craft a ...
Asked on 24 November 2008 by Bojidar Djordjev
Read Question in Full
No answers as yet.
|
| |
cut away
What means "cut away"in the Math page?
Else I have understand anything.
Thank You for ev. answer.
Asked on 20 November 2008 by Luciano Castellani
Read Question in Full
No answers as yet.
|
| |
Nintendo Wii
How do gyros in the nintendo Wii work?
Asked on 17 November 2008 by Sam Humphreys
Read Question in Full
No answers as yet.
|
| |
Revolutions against inner
144 dimentional levels 360 degrees divided by 144 = 2.5. 45 divided by .5 = 18. Then 160 divided by 64 =2.5. 64 divided by144=0.444444. BUT times 360 =159.9999998, 360 times 11= 3960 divided by 144 ...
Asked on 12 November 2008 by PATRICK
Read Question in Full
View Answers (2 answers)
|
| |
Where is perfect equilibrim
IS it 179.9999997 or 32,399.99996
Asked on 12 November 2008 by PATRICK
Read Question in Full
No answers as yet.
|
| |
GYRO MAKE UP
Close passin mateirials will cause vibration or and heat or and sound, by proximity of another moving mass. If gyro was made up of lets say plutonium 239 then how would it react in close proximity to ...
Asked on 12 November 2008 by PATRICK
Read Question in Full
No answers as yet.
|
| |
GYRO MAKE UP
Is there a cerain sped of gurosc revoluion for each metal or chemical where the weight Via fluidicity is altered and is mappable to show indifference
Asked on 12 November 2008 by PATRICK
Read Question in Full
No answers as yet.
|
| |
turn slip indicator gyro
What type of gyro is used in a Turn and Slip Indicator?
Asked on 11 November 2008 by jo
Read Question in Full
No answers as yet.
|
| |
direction of active couple
how to find the direction of active couple when we know direction of rotor and direction in which aeroplane turn
Asked on 9 November 2008 by prerna gupta
Read Question in Full
No answers as yet.
|
| |
Parts
I am looking to recondition my Orbotron, I would like to find original style bindings for the feet and and ball joints [pivot joints]. I live in Yuma AZ
Asked on 1 November 2008 by Susan Roff-Fuquay
Read Question in Full
No answers as yet.
|
| |
Sandy Kidd's research.
I'm wondering if Sandy Kidd is still reading this site, and if so, if there is a possibility of seeing more information regarding the workings of his prototypes. Thanks!
Asked on 29 October 2008 by Jason Walker
Read Question in Full
No answers as yet.
|
| |
PERPETUALITY
If laithwaites module of a prototype was magnets placed at end of spokes approx 36 lets say on a wheel much like millenium wheel to pass by one opposing magnet placed at base of rotating wheel as in p ...
Asked on 26 October 2008 by PATRICK
Read Question in Full
No answers as yet.
|
| |
4 Y
Are u shitin me or what !!!!!! 367 oposed to 359 ..........NITRO bla bla bla........ you all think that yo can ask your crass so pathetic questions but 4 why...and 4 why???? ....fluidicity upon cre ...
Asked on 11 October 2008 by PATRICK
Read Question in Full
View Answers (6 answers)
|
| |
e mail address
my e mail address: hailynr@hotmail.com just in case...
Everybody is buying...please we need a SELLER!!!
Asked on 9 October 2008 by hailyn
Read Question in Full
View Answers (1 answers)
|
| |
Mk12-3 GYRO 73538
IS ANYONE INTERESTED IN PURCHASING THIS GYRO? WILL SUPPLY PICTURE TO ANY REQUESTS.
GYRO IS MOUNTED TO A CIRCULAR WALNUT PRESENTATION BASE.
FOR THE PERSON WHO WOULD LIKE TO SEE IT OPERATE: I TOO ...
Asked on 4 October 2008 by Jerry Skrobacki
Read Question in Full
No answers as yet.
|
| |
Electric Gyros and Pendulous Vanes
So I'm in an instrument flight theory class and our instructor asked us to find out the purpose of pendulous vanes in an electric gyro. I can't find anything about pendulous vanes in an electric gyro, ...
Asked on 25 September 2008 by Tanner Johnson
Read Question in Full
No answers as yet.
|
| |
9/11
WHY WAS THERE A HOLE YEAR WITH NO ACTION GAINST TERRORIST ORGANISATIONS BY THE US,AND UPON A UNION WITH THE UK OF BLAIR BUSH..AGAIST PROTESTERS OUTSIDE PARLIMENT AND UPON MAINSTREAM NEWS OF BLAIR BUSH ...
Asked on 10 September 2008 by PATRICK
Read Question in Full
No answers as yet.
|
| |
PRIME NUMBRS
WHY DID LAITHWAITE NOT SEE 367....359
Asked on 10 September 2008 by PATRICK
Read Question in Full
No answers as yet.
|
| |
how to callibrate the gyroscope?
hi..
i'm new here, i would like to ask you, how to callibrate the tri-axis gyroscope?
normal procedure
Asked on 1 September 2008 by hafizul
Read Question in Full
View Answers (1 answers)
|
| |
Structural vibration control in civil engineering by using Gyroscope
I am studying on Structural vibration control in civil engineering by using Gyroscope
Can you inform me the people who have been studying this matter?
Asked on 29 August 2008 by Quang
Read Question in Full
No answers as yet.
|
| |
Structural vibration control in civil engineering by Gyroscope
Hi everybody
I am studing about Structural vibration control in civil engineering by Gyroscope.
Who are studing about it?. help me?
Asked on 29 August 2008 by Quang
Read Question in Full
View Answers (1 answers)
|
| |
gimbal
I would like to know how to make a gimbal (bearing) a large e picture would be nice, Thank YOU
Lane
Asked on 28 August 2008 by Lane Mason
Read Question in Full
View Answers (1 answers)
|
| |
Where are my mirror sites?
In Googling my 11 year public experiment on inertial propulsion, code named "GIT", and "update34.htm", I got one hit, this site.
Open.org shut me down, and I've not been able to publically relate ...
Asked on 18 August 2008 by David Eugene Cowlishaw
Read Question in Full
View Answers (3 answers)
|
| |
earthgyro
what is earthgyro,working&application
Asked on 17 August 2008 by suresh
Read Question in Full
View Answers (1 answers)
|
| |
Can centrifugal force be used for compressing gas?
Can centrifugal/centripetal force be used for compressing/expanding gases? Like air? Refrigerant?
Thanks, Boomer...
Asked on 5 August 2008 by Boomer
Read Question in Full
View Answers (2 answers)
|
| |
application
what are the uses of gyroscope?
Asked on 31 July 2008 by ravi aursang
Read Question in Full
No answers as yet.
|
| |
Met Tech
Has anyone heard of a company called Met Technology. Apparently they invented a unique type of gyroscopes and sensors. I saw it at www.mettechnology.com
Asked on 31 July 2008 by Sandro
Read Question in Full
No answers as yet.
|
| |
Giro question
How does this giro work.http://www.fitnesszone.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=FFFPU&Product_Code=12000
I have made one myself at a larger scale and can not get it to do the same ...
Asked on 26 July 2008 by Jim
Read Question in Full
View Answers (1 answers)
|
| |
what is diffrence between the space(free) gyro and tied (displacement) gyros?
what is diffrence between the space(free) gyro and tied (displacement)gyros?
Asked on 28 June 2008 by mosbah alamoriy
Read Question in Full
No answers as yet.
|
| |
NORWAY
Want to buy a gyroscope from someone in skandinavia, europe or england. New or used. Mail us at orjanjobb@hotmail.com.
Asked on 24 June 2008 by Oerjan
Read Question in Full
No answers as yet.
|
| |
gyrocars
please tell me about advantages of gyro stabilised cars over conventional cars
Asked on 24 June 2008 by ANOOP
Read Question in Full
View Answers (1 answers)
|
| |
Multiple Gyroscopes
Sorry if this question has been asked before, but I couldnt find anything by searching for anything I could think of.
I have a childhood memory of watching a documentary (possibly Horizon or Aren ...
Asked on 24 June 2008 by Alain Moran
Read Question in Full
View Answers (1 answers)
|
| |
fflpjdvm
sbqqqeiq http://eughyeuf.com snmqsrei thuaxokj [URL=http://ztnrdlei.com]wryfbwvw[/URL] ghlihwnj
Asked on 17 June 2008 by fflpjdvm
Read Question in Full
No answers as yet.
|
| |
JOURNAL ABOUT GYROSCOPE
Hi dears,
I want to know which journal does publish papers about gyroscope or papers correspond to gyroscope.
Thank you
Sh. Yazdani
Asked on 17 June 2008 by shahriar yazdani
Read Question in Full
No answers as yet.
|
| |
meeting on the 19th of june
Mr.Turner
Please, do not put this on your website. Are you able to view USA/DVD material or is your formatting strictly PAL. I do not have the software to convert to pal. If your able to view Ame ...
Asked on 31 May 2008 by James Roberts
Read Question in Full
No answers as yet.
|
| |
Meeting in June
Mr.Turner
Please, do not enter any of this on your website and indeed you have a remarkable website. I have enjoyed reading from what others had to say about gyro, gyro technology and so forth. Y ...
Asked on 30 May 2008 by James Roberts
Read Question in Full
No answers as yet.
|
| |
Comparison of Vibratory and FOG base Gyroscopes.
Can you please give the advantages and disadvantages of vibratory Gyroscopes and Fibre Optic Gyroscopes. If I can get the functional performance parmeters comparison of bothe tyoes,
Asked on 23 May 2008 by A. ADNAN
Read Question in Full
View Answers (1 answers)
|
| |
Gyroscope FOR SALE
My friend is selling a gyroscope. Its one of the sit down ones enclosed in perspex. It has flashing lights around it. It comes with a trailer which also has spot lights on it. Its located in Nottingha ...
Asked on 21 May 2008 by Emma Faux
Read Question in Full
View Answers (1 answers)
|
| |
Any sucesseful designs in this field?
Were there any successful propulsion systems ever designed and tested?
Asked on 16 May 2008 by cavemen
Read Question in Full
No answers as yet.
|
| |
John Scott Strachan
Can anyone give me contact details for John Scott Strachan please.
John, if you see this - I am interested in some of your other patents/ work..
Anna
Asked on 14 May 2008 by Anna McKay
Read Question in Full
No answers as yet.
|
| |
Would there be inertia if I move the gyro along it's rotation axis?
[URL=http://img360.imageshack.us/my.php?image=62498923vu9.gif][IMG]http://img360.imageshack.us/img360/9752/62498923vu9.th.gif[/IMG][/URL]
Would gyro make any resistive force if I push it parallel ...
Asked on 6 May 2008 by vla toky
Read Question in Full
View Answers (2 answers)
|
| |
power of gyroscopes
i have read all through the site and have a very very general idea of gyroscopes! i recently brought a powerball, which is basically a toy gyroscope that you spin up and maintain speed to increase the ...
Asked on 4 May 2008 by Mr A
Read Question in Full
View Answers (3 answers)
|
| |
energy storage in gyroscope
How much kinetic energy can be stored in a gyro ?
Asked on 2 May 2008 by charles zeller
Read Question in Full
View Answers (1 answers)
|
| |
Principles of a gyroscope
What are the main principles of a gyroscope?
Asked on 1 May 2008 by steve
Read Question in Full
View Answers (1 answers)
|
| |
Minimising Precession
Does anyone have a proven theory or test for reducing precession on a Vertical Gyro? And does mounting multiple gyros on top of each other in a solid cylinder reduce precession? Any help would be appr ...
Asked on 1 May 2008 by B Chambers
Read Question in Full
No answers as yet.
|
| |
build a gyroscope
I would like to build a gyroscope and i need to know if all of the rings need to be of equal mass for simmetry. If anybody has any basic plans for building a gyroscope or could point me in the directi ...
Asked on 24 April 2008 by jason giovinazzi
Read Question in Full
View Answers (3 answers)
|
